Home
About Us
Company Profile
Culture
Certification
Products
Faucet catalog
Hvac system
Valve catalog
Blog
Company News
Industry News
Contact Us
English
中文
COMPANY NEWS
INDUSTRY NEWS
From 1.6 MPa to 0.9 MPa: Why Does the Same Valve "Lose Strength" at High Temperatures? — A Guide to Using Pressure-Temperature (PT) Rating Curves
The pressure temperature rated curve (PT curve) - it determines whether the valve can be used under your operating conditions, and how much heat and pressure can be used.
09
2025
/
Should It Close or Stay Open During a Power Failure? — Safety Guidelines for Selecting Normally Closed vs. Normally Open Solenoid Valves
When the power is lost, the valve core closes by the spring force, and when powered on, the electromagnetic force overcomes the spring and opens.
What are the common symptoms of HVAC system malfunctions?
When cooling, the air outlet temperature is ≥ 15 ℃, when heating is ≤ 30 ℃, or the temperature difference between different areas in the same room is>3 ℃ - mostly due to filter blockage, dirty coils, refrigerant leakage, or hydraulic/air volume imbalance.
What problems can arise from an unreasonable HVAC system design?
High initial investment and space occupation; Frequent start stop of equipment, shortened lifespan, insufficient dehumidification, and indoor humidity.
Choose high energy efficiency ratio (such as variable frequency compressor, EC fan) and main engine with heat recovery function, with capacity calculated based on actual load, to avoid "big horse pulling small car" or "small horse pulling big car".
How to control the energy consumption of HVAC system?
The dirty filter instantly increases the fan current by 5% -15%, and keeping it clean is the cheapest way to save energy.
Message
If you have any questions, please contact us!